Vintage and Classic Hondas › General Discussions on most anything

1" front end to fit my cb750?

_‹ Previous Topic Next Topic _›

Classic

List

Threaded

5 messages Options

hwille

1" front end to fit my cb750?

Hello,

Does someone here ever out a 1" front end on your CB750(-72)? Like DNA springer front end, I dont really know the dimensions for the stock, is it 3/8"? Anyway, ive seen that cycleone has this neck stem conversion kit but its cost about 200$ to get it to Sweden. So I was wondering if someone has a cheaper solution to get it fit? I know its not that expensive but i rather get it done cheaper!

I wont change the stem on the frame cuz I need its to be stock to get it by the inspection here in Sweden, so is will stay as -72 otherwise it will be a 2013 bike.

(sorry for my bad english, hope you understand!)

Best regards!
Wille

Piute

Re: 1" front end to fit my cb750?

I'd start with Honda choppers
http://www.hondachopper.com/

1977 CB750 F2 Super Sport
<LET THOSE WHO RIDE DECIDE><RIDE TO LIVE-LIVE FOR JESUS>
Native American from central Cal, Kickstand UP in S.W.Missouri,

TOOLS1

Re: 1" front end to fit my cb750?

Administrator

In reply to this post by hwille

Hondachoppers.com SUCKS!!!!!!!!!!

I would bet if you called Kate at Cycle one she would be able to come up with a solution. Also have you tried Cycle-X. They are also really good to deal with.
TOOLS

Life is not about the number of breaths, you take, but the moments that take your breath away.
I don't have an anger problem. I have an idiot problem. Hank Hill
Never confuse education for intelligence.
Happiness is a belt fed weapon.
I just can't imagine what could go wrong.
No fire? No explosions? So whats the point of your story?
Those who are too smart to engage in politics are punished by being governed by those who are dumber. ~Plato
It couldn't be done, but the darn fool didn't know it, and did it anyway.
We all got problems. Ksharp
I like vintage bikes because they take me away from the clutter of technology that I work with everyday and back to a simpler time of mechanical elegance and simplicity.. "ninadm"
Darkwing Duck: The worst part of public transportation is the Public.
"That is awesome shit there" Re-Run
"Fear nothing, attack everything" Eric Berry
" Oh, you read that on the internet? Clearly it IS a massive problem. Of course it CAN’t be normal operation."

1976 CB 750-A X 2
1977 CB 750-A X 4
1977 CB 750-K
1976 CB 750 F
1981 CB 750
1966 Kawasaki SG 250
1981 KZ 750 LTD
1973 CB 350
1979 CM 185 Twinstar
1982 Honda XL 80
South of Eden (Kansas City MO)

Piute

Re: 1" front end to fit my cb750?

SUCKs

Deal with those that are using what you are wonting to do ,
Your putting this on a Café,Stock

I use this sight cause the info on stock 750's,But if I were to put a DNA (sportster)front end on a bike I would check both /all sources whether they SUCK or not.

1977 CB750 F2 Super Sport
<LET THOSE WHO RIDE DECIDE><RIDE TO LIVE-LIVE FOR JESUS>
Native American from central Cal, Kickstand UP in S.W.Missouri,

Larry spillman

Re: 1" front end to fit my cb750?

In reply to this post by hwille

Any time you change parts you have the failure rate to consider You could ream or hone out front forks and slide 1" tubes into old fork trees or keep shopping for fork trees that will fit your neck and accept 1" tubes.Theres always a cheap way to do things but will you trust your life on the change? Almost all of the old Hondas used the same neck bearing size and you can convert to taper roller bearings as well.What about wheel axel and brakes?