Hi all,
Just had the front wheel bearings on my 1977 CB750 SS replaced professionally at a shop where I just took off the wheel and brought it into the shop. Went to reinstall the wheel and the dual discs won't line up between the calipers. They both are hitting the right side of the slot in the calipers. See photos:
The axle is the type that is installed into the wheel and is held into place with a half-circle bracket. See schematic part #16:
http://www.bikebandit.com/houseofmotorcycles/1977-honda-750-super-sport-cb750f/o/m151839#sch405617The axle cannot shift to the left due to the fact that it would hit the bolt that is seen in the picture
Is there a trick or certain order that everything needs to be put back together and adjusted again so that everything lines up right? As it is, the right disc is right up against the right fork. Please help if you can....feeling a bit frustrated right now as I thought the wheel would go right back on without any issues.
Phil. 4:13 " I can do all things through Him who strengthens me"