...that goes inside the rear brake arm for the drum brake bikes. The barrel that the brake pull rods goes through.Not the adjustment nut on the back,just the cylindrical piece that goes inside the brake arm(not lever). If you can understand what I'm trying to say and have one....I'd like to purchase it pleaseThx!
On Fri, Nov 30, 2012 at 8:12 PM, shinyribs [via Honda CB750'S] <[hidden email]> wrote:
...that goes inside the rear brake arm for the drum brake bikes. The barrel that the brake pull rods goes through.Not the adjustment nut on the back,just the cylindrical piece that goes inside the brake arm(not lever). If you can understand what I'm trying to say and have one....I'd like to purchase it pleaseThx!
Montvale,Virginia
Piute said it best: "wheres my 10mm?"
Hellbilly-"that is a great way to tell if you have come to your senses, when you start drilling random holes in things... "
LukeM-"Scooters rock, especially when they're in posse formation. "
Those who are too smart to engage in politics are punished by being governed by those who are dumber. ~Plato
History teaches us that men and nations behave wisely once they have exhausted all other alternatives. ~ Abba Eban
If you reply to this email, your message will be added to the discussion below:
I'm lazyNah,actually I didn't have a bolt that would fit it right and I almost jumped on the lathe and made one. But I know the material Honda used won't rust and give me trouble down the road. I don't have a piece of stainless to make it out of and I wasn't sure aluminum would hold up.
It will be in the mail Monday. Just got back from looking at the hope next build bike and will be picking it up next weekend.
With some luck this will be in the build thread in the next two weeks. I will have some deicisions to make as the swing arm, forks and wheels were change to a Suzuki and it has dics front and rear brakes. The wheels look like some kind of mag wheel Don't know if I will use them or stick to the plan with spoke wheel the same size. Like a 18" Time will tell.
Thanks Schultz. No rush on my part. I'm in no hurry at all. Let me know how much I owe ya man!
if you decide to go back with CB parts on the suspension holler at me. I got a couple front ends and a swing arm or two that need to evacuate the premises.
Dirty-Thanks for the offer! I think Schultz has got me covered
Shiny I will keep that in mind. I am liking the disc brake idea. I just need to see were it will go once I get started on the build.
OOO the brake doo-hickey is off that parts bike I had. We will square up on shipping some time. Who knows I may be take you up on some parts I may need.
Sounds good bud.Thanks! I do have some rear disc parts laying around too. If you do decide to go with the spokes, I have a spoke wheel for a rear disc. Not sure if it's a 17'' or 18''. I'm thinking 17
If the envelope is the size of a room, and 2 nice men with needles and scrubs on, run.
Not that I'm speaking from personal experience or anything.
Turbos, Hondas, 4-bangers, what could go wrong?
Shiny: [...] Considering the weather you've had to put up with I'd say you get an Iron Butt award and a Frozen Nipple trophy to go along with it. First time I've ever posted the word nipple... it ends here.
First, you take legal explosives and put them into pill bottles...
Then you prep the counselors...
You set up the targets (Zombie apocalypse preparations). They also had blood packs in 'em. :D
Then after a neighbor gets pissed that you're blowing things up, you give the Brit that's never shot a gun the biggest gun you've got, load it with a dozen tracers, and point to the now-combined pill bottles!
(Note: The final video was ~20 lbs tannerite. It takes 1/2 pound to blow off the hood of a car. We shook the house that we were at and paintings fell off the wall. We pissed off the neighbor that came by so much, he called the DNR who pulled up, asked if we were being safe (yep!) and left. Didn't check what we were doing (we'd already cleaned up) and didn't even get out of his jeep.)
Turbos, Hondas, 4-bangers, what could go wrong?
Shiny: [...] Considering the weather you've had to put up with I'd say you get an Iron Butt award and a Frozen Nipple trophy to go along with it. First time I've ever posted the word nipple... it ends here.
On Wed, Dec 5, 2012 at 11:30 AM, cdaiscool [via Honda CB750'S] <[hidden email]> wrote:
Ooh, shooting therapy!
Okay, let's see...
First, you take legal explosives and put them into pill bottles...
Then you prep the counselors...
You set up the targets (Zombie apocalypse preparations). They also had blood packs in 'em. :D
Then after a neighbor gets pissed that you're blowing things up, you give the Brit that's never shot a gun the biggest gun you've got, load it with a dozen tracers, and point to the now-combined pill bottles!
(Note: The final video was ~20 lbs tannerite. It takes 1/2 pound to blow off the hood of a car. We shook the house that we were at and paintings fell off the wall. We pissed off the neighbor that came by so much, he called the DNR who pulled up, asked if we were being safe (yep!) and left. Didn't check what we were doing (we'd already cleaned up) and didn't even get out of his jeep.)
Turbos, Hondas, 4-bangers, what could go wrong?
If you reply to this email, your message will be added to the discussion below:
Locked
Thx!
or these
Thx!
Nah,actually I didn't have a bolt that would fit it right and I almost jumped on the lathe and made one. But I know the material Honda used won't rust and give me trouble down the road. I don't have a piece of stainless to make it out of and I wasn't sure aluminum would hold up.
How much do I owe ya?
Don't know if I will use them or stick to the plan with spoke wheel the same size. Like a 18" Time will tell.
Build
I am liking the disc brake idea. I just need to see were it will go once I get started on the build.
