Issues after carb rebuild

[munster]

Hi and good news Bike now runs, floats were the right way, I reset the float heights and checked the flow before I put carbs back on. it back fires a sounds a bit lumpy and I have to get it to idle....more tweeking

[anthony8488]

Glad to hear! Hope your tweaking works out and can get you back on the road!

Sent from my iPhone

On May 30, 2014, at 2:11 PM, "munster [via Honda CB750'S]" <[hidden email]> wrote:

Hi and good news Bike now runs, floats were the right way, I reset the float heights and checked the flow before I put carbs back on. it back fires a sounds a bit lumpy and I have to get it to idle....more tweeking

---

If you reply to this email, your message will be added to the discussion below:

http://honda-cb750-s.456789.n3.nabble.com/Issues-after-carb-rebuild-tp4050486p4051549.html

To unsubscribe from Issues after carb rebuild, click here.
NAML

[munster]

Thanks Anthony, there is a classic show in two weeks would like to make that.

[munster]

Changed accelerator diaphragm and air cut off diaphragms and used colour tune to set mixtures, took bike out accelerated well up to 6500-7000 occasional backfire at low rpm...does anyone know the correct idle speed?