Making my fender and brace

[Lucky 1]

The first photo is the 1978 Honda CB750 front fender inside.
The second photo are tack welds on the inside of the brace to
make the two pieces stiffer.

Then I cut the brace and fender out as a unit.
Then sanded and fitted the brace to the front forks.
I made sure the fender will fit tightly over the brace.








I will report back with finished photo after painting and installation.

[Piute]

                                                                 

                                                       that a plastic fender ?
                                                         going to look nice
                                                            once done / on
                                                                 

[shinyribs]

Cool idea! What fender is that?

[Lucky 1]

I bought the fender on Ebay.
It is a Universal Cafe front fender. from VINTRACE $57.00 (ouch)
The fender is very light weight plastic but it is about 3/16 thick material.
You can get a few colors too.

Here are the finished photos after I painted the metal fender brace black.

[Vintage]

Looks nice, I like it