Vintage and Classic Hondas

Need a dual disc master cylinder

_‹ Previous Topic Next Topic _›

Classic

List

Threaded

5 messages Options

slownugly007

Need a dual disc master cylinder

I jumped the gun and removed my old master cylinder and got rid of it, bought a new one....the bore was too small for dual disc, bought one of an 89 ZX10, rebuilt it and got it looking goooooood...reservoir hits handlebar clamps!?

hahaha So now im on the hunt for another one, would like to just go back to my stocker cuz i know it fit. So if anybodies got one theyd like to get rid of let me know. Thanks

TOOLS1

Re: Need a dual disc master cylinder

Administrator

For custom work, I prefer the Kawasaki master cylinders. They come in straight, and angled, so they should fit anything. They also have a 5/8" bore. They will have "5/8" on the bottom. Also they are super easy to rebuild.
TOOLS

Life is not about the number of breaths, you take, but the moments that take your breath away.
I don't have an anger problem. I have an idiot problem. Hank Hill
Never confuse education for intelligence.
Happiness is a belt fed weapon.
I just can't imagine what could go wrong.
No fire? No explosions? So whats the point of your story?
Those who are too smart to engage in politics are punished by being governed by those who are dumber. ~Plato
It couldn't be done, but the darn fool didn't know it, and did it anyway.
We all got problems. Ksharp
I like vintage bikes because they take me away from the clutter of technology that I work with everyday and back to a simpler time of mechanical elegance and simplicity.. "ninadm"
Darkwing Duck: The worst part of public transportation is the Public.
"That is awesome shit there" Re-Run
"Fear nothing, attack everything" Eric Berry
" Oh, you read that on the internet? Clearly it IS a massive problem. Of course it CAN’t be normal operation."

1976 CB 750-A X 2
1977 CB 750-A X 4
1977 CB 750-K
1976 CB 750 F
1981 CB 750
1966 Kawasaki SG 250
1981 KZ 750 LTD
1973 CB 350
1979 CM 185 Twinstar
1982 Honda XL 80
South of Eden (Kansas City MO)

shinyribs

Re: Need a dual disc master cylinder

Administrator

Hey Slow. Can you put up a pic of it? Also,how much do you want for it?

....do you warranty your work?

slownugly007

Re: Need a dual disc master cylinder

In reply to this post by TOOLS1

Ok cool, Ill check those out Tools. Any particular year to look for? I really liked the one off the ZX10, it was easy to rebuild and had the adjustable lever and had a real clean design.

Shiny, sorry I didnt get to work on the bike last night but Im going over there today so ill snap a picture and send it to you. If you end up wanting it I can throw it and the vapor in a box and get the both to you.

Re-run

Re: Need a dual disc master cylinder

Administrator

Why not find a master for a goldwing? Late 70s - early 80 master should fit no problem. Or get one for a cb750F. You know that will work.

Otherwise maybe go to a shop and do some measurements on some masters they have there and see what fits. Virtually anything today will have enough power, from a 500cc bike on up.

The ride IS the adventure. The destination is just to get gas!