Need an assist on starter swap out

[brcree]

 Hello, I'm at the point of pulling my starter out of my 76 cb750 k6......I have everything undone at this point....but cant get the starter out of eng. case. Is there a trick at this point?

[Re-run]

If I remember correctly, at the back of the starter are some threaded holes. You can put a bolt in these holes and then use the bolt to lift the back of the starter out. For some reason, I think the bolts used for the starter housing cover will work for this.

[brcree]

That did the trick...thanks a mill...............