|
|
After 3.5 years of the project build, we are down to the wiring of all the new stuff. Problem is before we can tie in the new, we have to first make sure the old works!
Looking for anyone who can assist, ours is a 80 cb750c and we are dealing with the ignition switch and the tl1 and tl2 with the ON and P key positions.
We cannot find out what is actually supposed to be lit when the key is in the ON position and what is lit when the key is in the P position.
We found a few corroded connections right at the "idiot light" panel. Repairing and following the wire diagrams available around the net, we've got the headlight only up and running on the ON position and nothing else, (no taillight and no brake light), where in the P position all we have is the taillight on with no brake light or headlight.
Can anyone out there tell us what IS supposed to be on or lit when the key is in the ON position and what is supposed to be on when the key is in the P position?
Also if anyone knows what the T1 and T2 in the wiring diagram actually means we'd be tickled to hear an explanation on what it means.
Also are the turn signals supposed to be involved in any way with the key in these positions? They aren't doing anything or even blinking with the turn signals on in the left or right positions.
Thanks in advance for any help on this!
Thickmc
|
Locked
