Problem with #3

[Hoko]

My #3 carb accelerator jet is plugged.  Anyone have a tip on how to get it unplugged?

[Lucky 1]

Try un doing the fuel hose that leads to that carb from the accelerator pump and spray carb clean into it.
Then alternate with compressed air.

Protect your eyes!!!

[shultz_1978]

What Lucky said.

If you pull that side of the carb bank a part. You can plug up the other side of the fuel feed lines, With your finger. Carb or brake cleaner then compressed air.

[Hoko]

Thanks for those tips!  I also found another tip in my collection of info about using a high E metal guitar string and it fit that accelerator jet hole perfectly.  Unplugged it immediately then I used compressed air to blow through the jet to blow whatever it was out of the tube.  Had better flow in that jet than any of the others so I did the same thing to all of them, made big difference.