The clutch is cable operated, so pressure should not have built up. First thing to check is cable routing. It should make smooth gentile bends and not be pinched anywhere. Another thing to check is if the cable could be going bad inside the sheath. I have installed cables and had them be hard to pull. Then find out that the cable is frayed inside the sheath. On the brake, again pressure should not have been able to build up. The pads are supposed to be close to the rotors. You should not be able to see light between them. Will the wheel rotate? If it will, you are good. If it won't, try loosening the bleeder. If the wheel will then rotate, you have a master cylinder problem. If it won't, you have a caliper problem. We can diagnose better after these questions are answered.
TOOLS
Life is not about the number of breaths, you take, but the moments that take your breath away.
I don't have an anger problem. I have an idiot problem. Hank Hill
Never confuse education for intelligence.
Happiness is a belt fed weapon.
I just can't imagine what could go wrong.
No fire? No explosions? So whats the point of your story?
Those who are too smart to engage in politics are punished by being governed by those who are dumber. ~Plato
It couldn't be done, but the darn fool didn't know it, and did it anyway.
We all got problems. Ksharp
I like vintage bikes because they take me away from the clutter of technology that I work with everyday and back to a simpler time of mechanical elegance and simplicity.. "ninadm"
Darkwing Duck: The worst part of public transportation is the Public.
"That is awesome shit there" Re-Run
"Fear nothing, attack everything" Eric Berry
" Oh, you read that on the internet? Clearly it IS a massive problem. Of course it CAN’t be normal operation."
1976 CB 750-A X 2
1977 CB 750-A X 4
1977 CB 750-K
1976 CB 750 F
1981 CB 750
1966 Kawasaki SG 250
1981 KZ 750 LTD
1973 CB 350
1979 CM 185 Twinstar
1982 Honda XL 80
South of Eden (Kansas City MO)