Hi Everyone,
Been awhile since I posted. I am getting my 750K (77) model back together after a teardown
and rest like I did my 75(Katman's75 rebuild section). I am having to replace the wiring harness
and got another a 77 that looks the same except for the plug in to the switch. Mine old one has a brown jumper attached to one side then the jumper goes to the bottom.(Pic). New harnes has the 2 brown wires seperate coming out of the harness. Can I use this okay on my bike. ( This is the plug that goes into the ignition switch)
Thanks
Keith
Locked
