Re: Jetting Question

Posted by vern401 on
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/Jetting-Question-tp1032669p1038733.html

Hanging/lagging rpm is usualy due to the carbs not being synced right or the floats are not all set the same.
Make sure all your slides are going back down and the needles are all at the same setting.
Anothe possible problem is a vacuume leak. use carb cleaner or WD-40 and spray any connection that goes to the carbs or intake to ensure it is not leaking.
Check the timming it can also cause those symptoms.