Re: ignition coil

Posted by lcochran on Dec 25, 2010; 11:04pm
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/ignition-coil-tp2143185p2145537.html

ah okay, i'll check out Z1.
I called it an ignition coil, but that's incorrect. My coils under the tank are fine. The ignition pictured on that post is whats not working.  Checked the resistance across each of the 2 lines that feed the coil up under the tank and one was <1 in the decimals(.3-.4) and the other varied from 6-13 in whatever units of ohms my meter was in.
Which makes sense because cylinder 1 and 4 have adequate spark, cylinders 2-3 have no spark and both coils 1 and 2 test fine.

So should i replace the old dyna S with a new one from Z1?