Re: Please help a fresh back solider get his bike to run.

Posted by drewj on May 07, 2011; 11:35pm
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/Please-help-a-fresh-back-solider-get-his-bike-to-run-tp2910515p2913820.html

so if i have power to the coils at the connection, the coils test out good, what would be the proper way to check the points to figure out why the coils wouldn't be discharging on the secondary side. I thank you for stressing to make sure the carbs are clean but i know for a fact there was no spark and that is the pressing issue. ( i found this out originally when i pulled the plugs trying to figure out why the three other cylinders werent running and the plugs where all gas soaked and my timing light wouldn't pick up any wire pulse on those three cylinders. I've very familiar with ICM but sadly not points ignition, this is my first.