Re: Carb Disassembley
Posted by samir_nayanajaad on Sep 03, 2011; 1:49am
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/Carb-Disassembley-tp3296459p3305764.html
Thanks for the info shinyribs
I finally got to take apart one carb today after work. It all went well I think. No parts left over after re-assembly and it looks a bit cleaner. I had one question about an issue I ran across. Inside the throttle valve(thats what the manual calls it anyway) there is a ton of rust on the internal parts.
I looked in the service manual and it looks like im missing parts or have a totaly different set up on the carbs so it wasn't a lot of help. Im thinking just some pb blaster or wd40 and let it sit for a while. What do you guys say?
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/Carb-Disassembley-tp3296459p3305764.html
Thanks for the info shinyribs
I finally got to take apart one carb today after work. It all went well I think. No parts left over after re-assembly and it looks a bit cleaner. I had one question about an issue I ran across. Inside the throttle valve(thats what the manual calls it anyway) there is a ton of rust on the internal parts.
I looked in the service manual and it looks like im missing parts or have a totaly different set up on the carbs so it wasn't a lot of help. Im thinking just some pb blaster or wd40 and let it sit for a while. What do you guys say?
Why does it say paper jam when there is no paper jam? I swear to god one of these days, I just kick this piece of shit out the window.
| Free forum by Nabble | Disable Popup Ads | Edit this page |