Re: Which Electronic Ignition Should I Buy?

Posted by Peterwh on Oct 28, 2011; 11:17pm
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/Which-Electronic-Ignition-Should-I-Buy-tp3461637p3462341.html

No problem.  When I get back I will re-write the wiring instructions for you and see if I can make a wiring diagram that I can put up on here.  The mechanical instructions are fine, it was just the electrical that took about 30 minutes to understand properly.  Maybe it was just me.  What confused me is that you have to connect two existing wires together and wire them to a single connector on the coil.  We will have to also see if we can work out how to deal with the front coil mounting.  As I said before, I wouldn't hesitate to buy it if it's the kind of thing you are looking for.

One other small after thought.  There is one wire coming from each of the two triggers that replace the points, that is two wires in total.  These two wires have to go through the hole in the casing and the two wires together were too big to go through the rubber grommet, so now I have an unsealed hole where water could get through.  I'm thinking about sealing it neatly with a bit of silicone sealant and I wondered what anyone on the forum thought?