Re: Choke cable replacement?!

Posted by mikefootusa on Nov 01, 2011; 1:16am
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/Choke-cable-replacement-tp3469346p3469551.html

Hey JP,
I just ran into a similar circumstance after rebuilding my carbs I attached the throttle cables before sliding in the carbs...but did not do the choke cable.  I suggest removing the seat and tank.  With a long thin screwdriver you can reach down and guide the end barrel of the cable around the slotted cam of the choke...and hold it in place (a helper would make it easier) then from the right side of the bike using a small flashlight and another long thin screwdriver (or pointed dental tool) wiggle the barrel into the slot and pull up on the cable when it's aligned, tighten the clamp temporarily and then adjust the choke.