Re: No electric....

Posted by Re-run on Jan 20, 2012; 2:56pm
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/No-electric-tp3674664p3675642.html

As suggested, get new fuses. if you can, find a new block though. The old one is ok though.
So, either get some light grit sandpaper and clean your current block up, or get a new block that uses blade fuses. I plan on doing the blades sometime myself.

If the issue happens again though, check the connector to the ignition switch, they can get loose sometimes on the inside.