Re: Wheel interchange question.SOHC to a DOHC
Posted by shinyribs on Feb 08, 2012; 8:55pm
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/Wheel-interchange-question-SOHC-to-a-DOHC-tp3721631p3727490.html
Ah! You beat me to it! My bike only had a single front brake. Rotor is 10 7/8" dia. & offset is 1" from mounting surface to outermost edge. Rotor thickness is right at 3/16",but that is probably irrelevant.One thing i did NOT think to measure is the bolt circle the rotor bolts on.It's a 5 hole pattern,but i need to measure the bolt circle.If the bolt circle and rotors match you should be able to swap your rotors from one wheel to the other.But the fork width is still a snag.
Also,the right hand switch gear i have is fairly old.Old enough it has an on-off switch for the head light. Not sure if these will work for you or not.
Also they are missing some hardware for the other throttle cable. I assume that would come new with a new cable?Anyone have any insight on this set-screw btw?
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/Wheel-interchange-question-SOHC-to-a-DOHC-tp3721631p3727490.html
Ah! You beat me to it! My bike only had a single front brake. Rotor is 10 7/8" dia. & offset is 1" from mounting surface to outermost edge. Rotor thickness is right at 3/16",but that is probably irrelevant.One thing i did NOT think to measure is the bolt circle the rotor bolts on.It's a 5 hole pattern,but i need to measure the bolt circle.If the bolt circle and rotors match you should be able to swap your rotors from one wheel to the other.But the fork width is still a snag.
Also,the right hand switch gear i have is fairly old.Old enough it has an on-off switch for the head light. Not sure if these will work for you or not.
Also they are missing some hardware for the other throttle cable. I assume that would come new with a new cable?Anyone have any insight on this set-screw btw?
| Free forum by Nabble | Disable Popup Ads | Edit this page |