Making my fender and brace

Posted by Lucky 1 on Feb 29, 2012; 10:52pm
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/Making-my-fender-and-brace-tp3788924.html

The first photo is the 1978 Honda CB750 front fender inside.
The second photo are tack welds on the inside of the brace to
make the two pieces stiffer.

Then I cut the brace and fender out as a unit.
Then sanded and fitted the brace to the front forks.
I made sure the fender will fit tightly over the brace.








I will report back with finished photo after painting and installation.