Re: Drag bars
Posted by slownugly007 on Mar 23, 2012; 2:23pm
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/Drag-bars-tp3850365p3851705.html
Oh and as for the hole question, I drilled mine. I measured roughly 7 1/4" from the end of the bar to the center of hole to be drilled. Where you want it on the circumference of the bar is your personal preference, depending on what angle feels good to you. I just put my controls on tight enough where I could twist them into position and sat on the bike and put it where I liked them and marked it, then measured the 7 1/4" and drilled. Worked great! Hope that helps you