Re: best place to take oil temperature
Posted by cdaiscool on Mar 28, 2012; 4:40am
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/best-place-to-take-oil-temperature-tp3862926p3863540.html
I will double-check Thursday if I remember, but I think there's fittings on both sides, as well as in the back. On my setup in the car:
1 leg goes to the turbo.
1 leg goes to a mechanical pressure gauge
out the back is the stock oil pressure gauge sensor.
So you can probably make something work. This IS specially-made for the B-series block in the Integra/Honda scene, but again - it will work if it's the same fitting. It's made of steel, not brass like most of these. Be wary of what you get.
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/best-place-to-take-oil-temperature-tp3862926p3863540.html
I will double-check Thursday if I remember, but I think there's fittings on both sides, as well as in the back. On my setup in the car:
1 leg goes to the turbo.
1 leg goes to a mechanical pressure gauge
out the back is the stock oil pressure gauge sensor.
So you can probably make something work. This IS specially-made for the B-series block in the Integra/Honda scene, but again - it will work if it's the same fitting. It's made of steel, not brass like most of these. Be wary of what you get.
Turbos, Hondas, 4-bangers, what could go wrong?
Shiny: [...] Considering the weather you've had to put up with I'd say you get an Iron Butt award and a Frozen Nipple trophy to go along with it. First time I've ever posted the word nipple... it ends here.
Shiny: [...] Considering the weather you've had to put up with I'd say you get an Iron Butt award and a Frozen Nipple trophy to go along with it. First time I've ever posted the word nipple... it ends here.
| Free forum by Nabble | Disable Popup Ads | Edit this page |