Login  Register

Re: DOOOOOOOOOOOOOHHHHHHHHHHH!!!!!!!!

Posted by slownugly007 on Apr 14, 2012; 7:17pm
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/1981-CB750F-SS-a-k-a-Project-Plaid-Mandingo-tp3762476p3910724.html

Shiny, when you attached the brass fittings did you just use regular teflon tape to seal it? I went to home depot and picked up a few fittings that Im going to try to rig up. I bought a 3/8" pipe cap and drilled the top of it to accommodate a male elbow thats fitted with a barb end. The cap fits my bung pretty good but I want to seal it somehow to be 100%. Maybe I can stick a small o ring in it and teflon tape the threads? I considered using jb weld, but decided against that immediately because Im sure at some point Id want to remove this contraption. I jb welded all the fittings just to be safe and know at least that theyre sealed....this is what I have so far



Hopefully if I can get it sealed around the bung on the tank Ill be set! Its not the prettiest thing but for now I think it will work and now i can ride!!!! WOOOOOOOOOOOOOOOOOOO!! Now if this daggum jb weld would cure a little faster I could test it out....keep yalls fingers crossed!