Re: CB650 SC Oil Cooler for CB750's

Posted by Piute on Apr 16, 2012; 11:12pm
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/CB650-SC-Oil-Cooler-for-CB750-s-tp3909678p3915840.html

http://www.bikebandit.com/houseofmotorcycles/1984-honda-night-hawk-650-cb650sc/o/m151719#sch400589
http://www.bikebandit.com/houseofmotorcycles/1977-honda-750-super-sport-cb750f/o/m151839#sch403072
 
                                               use Bike Bandits OEM spec.
                                             
    O.K. looking at both specs  84 650sc    side by side         with 77 750f
                     
                         main bolt   581221 650 smaller houseing    581110
                     valve check    581240       same                    581240
            spring valve check   581241       same                     581241
          pin spring setting      581242       same                     581242
                   bigg spring      581099       same                     581099
                             filter     581064       same                     581064

                                                    bigg"O" ring 89x4.5

          So what ya think can I just swap out the rear plate and remove ? spacer.
           need to see inside SC plate fo flow desgn
          this is cool learning alot all over this putter

  With all even the K being the same any switch should be easy for all Tanks again srg/ tools