Re: Problem of the year!

Posted by shinyribs on
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/Problem-of-the-year-tp3893671p3925408.html

The easiest way to set the floats is just set them level.

Where are your idle mixture screws adjusted at? Turn them all the way in until they just lightly seat,or stop.Then back them out 1 1/2 turns.Your bike MAY need more turns out,but that should be enough for it to run correctly

The true way to adjust your idle mixture screws is to start at 1 1/2 turns out and then slowly open them more.If the motor speeds up then it needed the extra idle mixture.Once the motor stops increasing rpms by doing this,that is where they should stay.

Good luck!