Re: Looking for some DOHC horsepower
Posted by shinyribs on Apr 24, 2012; 5:54am
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/Looking-for-some-DOHC-horsepower-tp3928486p3934456.html
Exactly!
Have you checked to see if anyone makes a stroker crank for a DOHC? That would make your life easy.
Here are the bore sizes as related to the cc for a 750. These kits are for SOHC's but it should relate.
A 65mm bore with a 750 crank gives 836. Shows how much extra capacity is afforded by that 900 crank since the stock 900 bore is 64.5mm
*notice the part about breaking rods...thats how you know you're on the right path
Yeeeeeee-haw!
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/Looking-for-some-DOHC-horsepower-tp3928486p3934456.html
Exactly!
Have you checked to see if anyone makes a stroker crank for a DOHC? That would make your life easy.
Here are the bore sizes as related to the cc for a 750. These kits are for SOHC's but it should relate.
A 65mm bore with a 750 crank gives 836. Shows how much extra capacity is afforded by that 900 crank since the stock 900 bore is 64.5mm
*notice the part about breaking rods...thats how you know you're on the right path
Yeeeeeee-haw!
| Free forum by Nabble | Disable Popup Ads | Edit this page |