Re: Cleaning and adjusting a carberaters best videos for dummies: This ought to be pinned at the top

Posted by Lucky 1 on Apr 24, 2012; 7:17pm
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/Cleaning-and-adjusting-a-carberaters-best-videos-for-dummies-This-ought-to-be-pinned-at-the-top-tp3905817p3936294.html

The new plastic floats are so light they will NOT depress
the float spring even with the float resting on it.
You would have to push the float down with your finger.

With the older brass floats that was an issue but not anymore.

BTW on that first video the guy measures 13.393 that is not 14.5mm
But with a digital caliper you saw it jumping all around. Aggrevating!

Just get a good dial 6 inch caliper that reads in thousandths.
Get the one that is 0-.100 thousandths in one revolution.
It is the most common.