Re: My '78 cb750 Bobber

Posted by shinyribs on
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/My-78-cb750-Bobber-tp3466614p3946255.html

Your best bet is to get them made up local.They are common sizes,both the line and the ends. 10mm banjo fittings is what they are. Buying them from a vendor really drives up the cost. Im working on putting together a package for these at the speed shop to see if we can sell them cheaper.The lines we have hold up to nitrous applications and can withstand 1500+ psi.Its good stuff.

If you just need the two lower hoses longer that would probably run you about:
$18 ea. for the lines-braided stainless steel w/teflon liner NOT RUBBER!
$30 for all four adapters ( to adapt the AN lines to your banjo bolts)
and
$30 if you wanted 4 new banjo bolts with new crush washers

but banjo bolts and crush washers never wear out

I am not 100% positive on these prices,but they should be very close.

And we are in Virginia,but shipping shouldn't be too much. I can check on it if you want.Just let me know how long you would need the lines to be.