Re: '82 750k carb float adjustment
Posted by cdaiscool on May 13, 2012; 6:08pm
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/82-750k-carb-float-adjustment-tp3984087p3984307.html
The manual I used also said that if you don't clean the brass tube, then gas can get around the float and make it overflow as well. I cleaned mine with brasso; it's amazing how dirty it was without looking terribly dirty.
But since you're not getting gas, is the passageway blocked? There should be nothing blocking between the carbs, or in the carb's passageways. In one of my carb bodies, I had a blockage so bad it looked as though it was brass and supposed to be there. Needless to say, I had no gas after that blockage. Perhaps you've got the same issue?
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/82-750k-carb-float-adjustment-tp3984087p3984307.html
The manual I used also said that if you don't clean the brass tube, then gas can get around the float and make it overflow as well. I cleaned mine with brasso; it's amazing how dirty it was without looking terribly dirty.
But since you're not getting gas, is the passageway blocked? There should be nothing blocking between the carbs, or in the carb's passageways. In one of my carb bodies, I had a blockage so bad it looked as though it was brass and supposed to be there. Needless to say, I had no gas after that blockage. Perhaps you've got the same issue?
Turbos, Hondas, 4-bangers, what could go wrong?
Shiny: [...] Considering the weather you've had to put up with I'd say you get an Iron Butt award and a Frozen Nipple trophy to go along with it. First time I've ever posted the word nipple... it ends here.
Shiny: [...] Considering the weather you've had to put up with I'd say you get an Iron Butt award and a Frozen Nipple trophy to go along with it. First time I've ever posted the word nipple... it ends here.
| Free forum by Nabble | Disable Popup Ads | Edit this page |