Re: brakes, hard time building pressure.

Posted by rrgunslinger on Jun 09, 2012; 12:15pm
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/brakes-hard-time-building-pressure-tp4022531p4022584.html

If  you pump the breaks do they build up to where the leaver
is away from the grip and don't bleed off ? If so u either have air in them or your lines are expanding and u need new ones.

Harvey

On Jun 8, 2012 10:39 PM, "Clepto35 [via Honda CB750'S]" <[hidden email]> wrote:

It is slightly possible some air still trapped.  But I used a Lisle bleeding kit on both front calipers and got the fluid clear of bubbles.  I wonder if fluid is by-passing seals in the master cylinder or I did a lack-lustre job on freeing up the pistons in both calipers?

---

If you reply to this email, your message will be added to the discussion below:

http://honda-cb750-s.456789.n3.nabble.com/brakes-hard-time-building-pressure-tp4022531p4022566.html

To start a new topic under Honda CB750'S, email [hidden email]
To unsubscribe from Honda CB750'S, click here.
NAML