Re: hot wire ,also run lights, to ride,EMERGENCY

Posted by shinyribs on Jul 11, 2012; 4:25am
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/hot-wire-also-run-lights-to-ride-EMERGENCY-tp4024907p4024910.html

Do you have an Ohm meter? I would just pull the plug off the back pf the ignition switch. Then,while working the switch from 'OFF' to 'ON' see what two terminals make that connection.

You bike may be different,but on mine there is one fat red wire that feeds everything on the ignition switch. If you tie everything all together you should be hot wired-IF your switch is the same as mine.

The ON position applies voltage to the coils and the light circuit
The PARK position applies voltage to the tail light only.

If you tie everything together is should light up everything,including the coils.