Re: cam chain noise?

Posted by seestheday on Jul 25, 2012; 5:34pm
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/cam-chain-noise-tp4024941p4025876.html

fyi - you don't necessarily need to replace the gasket.  If it's still in good condition it can be reused.  If you're going to use gasket sealer on the dimes (I found it made no difference) make sure you use the flexible kind and don't use too much.

Also, you don't need to take the cover off to adjust the tensioner.  If you do take it off, make sure you check the valve clearances at the same time.

One other thing to watch for - do NOT over tighten the valve cover bolts.  It's easy to do using just your hand.  Use a torque wrench.  Even with a torque wrench the threads may already be damaged and tightening it to within spec could be enough to strip them.