Re: Tracking down problems

Posted by Re-run on Jul 29, 2012; 5:06am
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/Tracking-down-problems-tp4026014p4026064.html

Remove ALL rubber and plastic bits. Also, carb dips are mass cleaners but they do not get the small stuff such as the idle jets.
So, remove the float bowl gaskets, the fuel tube o-rings, I think there are a couple felt seals, And there are seals under teh top caps. Remove all these.

Pull the idle jets and clean those with a strand of copper wire.