On the center stand, the weight is off the wheel thus the swigarm is full extented. On the side stand the swing arm is compressed tightening the chain. & when you get on, you change the slack of the cain again. I usually have someone check the slack with me on the bike off the stands BEFORE I lock down the axle.
I tighten it just past snug to the 1st avaible notch the cotter pin goes into without forcing it. (make sure the pin is good) I avoid using a ratchet & use a box wrench with 2 fingers on it.
FIONA
1981 CB750K
Free forum by Nabble | Disable Popup Ads | Edit this page |