Re: My 78 CB750F Super Sport Project
Posted by shinyribs on Oct 02, 2012; 3:23am
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/My-78-CB750F3-Super-Sport-Project-tp4027636p4030185.html
It's not. Ceramic coatings are ceramic (sorry! not trying to be a smart aleck),powder coating is basically just melted plastic. There are different kinds-epoxy,flouropolymers(sp?),polyester and a few more,but these are the basic and most common three. Epoxies are the best all around for toughness and gloss shine(if it is a gloss).Polyesters flow very well for a very smooth finish/gloss,but dont have the abrasion resistance of epoxy. Flouropolymer is very tough and abrasion resistance,but doesn't gloss well.They tend to look milky after alot of weather exposure.Kinda got carried away there
my bad.
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/My-78-CB750F3-Super-Sport-Project-tp4027636p4030185.html
It's not. Ceramic coatings are ceramic (sorry! not trying to be a smart aleck),powder coating is basically just melted plastic. There are different kinds-epoxy,flouropolymers(sp?),polyester and a few more,but these are the basic and most common three. Epoxies are the best all around for toughness and gloss shine(if it is a gloss).Polyesters flow very well for a very smooth finish/gloss,but dont have the abrasion resistance of epoxy. Flouropolymer is very tough and abrasion resistance,but doesn't gloss well.They tend to look milky after alot of weather exposure.Kinda got carried away there
my bad.
| Free forum by Nabble | Disable Popup Ads | Edit this page |