Re: '81 CB750C "Rock-It"

Posted by Hoosier Daddy on Oct 22, 2012; 8:45am
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/81-CB750C-Rock-It-tp4031001p4031034.html

Thanks for the props! I will try and get you all caught up without loosing too much detail on how I got to where I am today.
Piute: Is that a side cover? I am thinging of making a custom pair out of fiberglass, but I also have some sheet aluminum that might be easier.

shinyribs : Thanks for the offer! I don't think so at this point but may have to later on... good to know.

While the body shop type work was going on, I also started in on the engine. The PO had pulled the head, cylinders and pistons. I inspected and measured everything I could think of per the manual and for the life of me can't figure out WHY he did it. Unles it was just to "freshen" things up.

I used kerosene to give it all a good washing, inside and out. Then a  used a toothbrush and rubbing alcohol on the outside so the Duplicolor engine enamle wout get a good grip.