Re: Trailer?

Posted by Piute on Nov 29, 2012; 11:54pm
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/Trailer-tp4032736p4032818.html

 
http://honda-cb750-s.456789.n3.nabble.com/piute-1977-CB-750-F2-SADDLE-BAGS-FAIRING-TRAILER-HITCH-touring-td3194402.html

My hitch was made for a G.W. (the swing has to swing free from all things)
 I reinforced the rear peg mount with a 1" steal band ,bolted to hitch to it then my heavy duty bag bracket ran peace of steal from there,The actual hitch is held to the chrome bracket with 4 "U' bolts.Check my trailer build lots of other pictures.
               the CHROME IS mane bracket the blk. is the actual hitch


  right side with !" band steal has 2 bolts to rear peg mount holes(rear peg removed)1 to to chrome bracket

  left side same but due to hitting swing had to put put on out side and only 1 bolt (peg removed)you can see under bagg were there is another bracket witch is a chrome band clamp used to mount things on crash bar.adapted to use 1" steal band.


  I will tie into this part once I get trailer and know the finale height for ball,is my main strength too

  The front hole is were not seen in previous picture were steal goes
   The rear hole will go from actual Blk. hitch to hole,then to end of frame were last seat/grab bar thru bolt,would be(grab bar removed),I could pull most anything .