Re: Front brake too tight
Posted by
shultz_1978 on
Jan 16, 2013; 2:58am
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/Front-brake-too-tight-tp4035330p4035336.html
The squealing could just be your rotor is glazed. Simple use some fine sand paper on it.( both sides ) As for the pads being to close. I would go through the steps of replacing the pad. Compress the piston in the caliper and then put the pads back in.
Once you are done with putting it back together. Try your brake and see if it is draging when you release them.
Then start from there. Good luck
Simple if some one else can, why can't I
Jamie