Re: Cleaned my carbs, bike won't run right. Pls help
Posted by shultz_1978 on Jan 20, 2013; 10:43pm
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/Cleaned-my-carbs-bike-won-t-run-right-Pls-help-tp4035484p4035506.html
It is ok to pull the low jets out just be easy with them not to bend them. Make sure the little holes a round the out side of them are also clean. If it run befor you can get it to run again.
Did you take them completly apart when you cleaned them? Top off, sides out everthing?
If you had the carbs all the way apart you should bench synce when you are putting them back together.
Good luck.
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/Cleaned-my-carbs-bike-won-t-run-right-Pls-help-tp4035484p4035506.html
It is ok to pull the low jets out just be easy with them not to bend them. Make sure the little holes a round the out side of them are also clean. If it run befor you can get it to run again.
Did you take them completly apart when you cleaned them? Top off, sides out everthing?
If you had the carbs all the way apart you should bench synce when you are putting them back together.
Good luck.
Simple if some one else can, why can't I
Jamie
Jamie
| Free forum by Nabble | Disable Popup Ads | Edit this page |