Re: questions about buying 1980 CB750C
Posted by shinyribs on Mar 04, 2013; 5:20am
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/questions-about-buying-1980-CB750C-tp4037311p4037339.html
Welcome to the forum!
The DOHC bikes are a little bit more complicated than the SOHC,but not too much. If you are even slightly mechanically inclined you'll be just fine.
The carbs on that bike are probably the most complicated thing you'll run into but if you use the search feature ( or just ask
) there's alot of info on here about them.
The valve adjustment requires shims,but the DOHC guys on here seem to have no problems getting the right parts and sorting out the shims. Again,just ask if you can't find it in the search feature and someone will be able to help you out. There is some pretty knowledgeable DOHC guys around here. Good luck and have fun!
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/questions-about-buying-1980-CB750C-tp4037311p4037339.html
Welcome to the forum!
The DOHC bikes are a little bit more complicated than the SOHC,but not too much. If you are even slightly mechanically inclined you'll be just fine.
The carbs on that bike are probably the most complicated thing you'll run into but if you use the search feature ( or just ask
) there's alot of info on here about them.
The valve adjustment requires shims,but the DOHC guys on here seem to have no problems getting the right parts and sorting out the shims. Again,just ask if you can't find it in the search feature and someone will be able to help you out. There is some pretty knowledgeable DOHC guys around here. Good luck and have fun!
| Free forum by Nabble | Disable Popup Ads | Edit this page |