Re: adjusting cv carbs???

Posted by Lucky 1 on Mar 21, 2013; 6:39pm
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/adjusting-cv-carbs-tp4038216p4038225.html

You cannot bench sync CV carbs.
The slide is vacuum operated, it is not controlled by a cable.

The butterfly in the intake can be adjusted so that all of
the butterfly's ( on the engine side of the carb) should start to open when you turn the throttle.
They should start open at the SAME time -as soon as you start to open the throttle.

Make sure all of the butterfly's are closing ALL the way!!

The idle is controlled by the butterfly cut out .