Re: VALVE ADJUSTMENT
Posted by RodneyCB750K1979 on Apr 09, 2013; 5:56am
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/VALVE-ADJUSTMENT-tp4039066p4039148.html
I bought a micrometer and new set of feeler gauges. I removed and mic'd each shim. I discovered the shim thicknesses averaged .05 mm thicker than they were stamped (example: a #285 shim which I thought was 2.85 mm thick mic'd out to be 2.90 mm thick). All measurements were taken at 58 F. Below is a spreadsheet to help me estimate the new shims needed.
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/VALVE-ADJUSTMENT-tp4039066p4039148.html
I bought a micrometer and new set of feeler gauges. I removed and mic'd each shim. I discovered the shim thicknesses averaged .05 mm thicker than they were stamped (example: a #285 shim which I thought was 2.85 mm thick mic'd out to be 2.90 mm thick). All measurements were taken at 58 F. Below is a spreadsheet to help me estimate the new shims needed.
| Free forum by Nabble | Disable Popup Ads | Edit this page |