Re: why do we need connectors?

Posted by dyelawn on
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/why-do-we-need-connectors-tp4039689p4039713.html

I think they're falling apart rather than pulling apart.  There should be plenty of slack in the wire to handle turning, and the wire is still embedded in the harness with the rest of them (and none of the other wires seem to have a problem).  Probably is just corrosion but hard to tell.

Thanks for the tip on the bullet connectors.  Probably will go that route and splice around the old connector.  Speaking of: is there a certain gauge or type that would be best for this type of thing?  My knowledge of electrical systems basically sums to knife + socket = die.