Re: Generator rotor removal
Posted by jimg44 on May 23, 2013; 7:56pm
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/Generator-rotor-removal-tp4041099p4041164.html
-07933-3000000 is the part number for the puller dynamo. My friendly dealer had one for a mere $37.55 after tax. It looks like you make one with a 20mm bolt. the dimensions of the tool are as follows. threaded outside dimension 19.87mm. necked down outside 18.05mm by 9mm long. While the end of the tool looks like it is made to be hit I found that snugging the tool in by hand and two or three light to taps with a 16 oz brass hammer to the handle clockwise the generator popped right off.
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/Generator-rotor-removal-tp4041099p4041164.html
-07933-3000000 is the part number for the puller dynamo. My friendly dealer had one for a mere $37.55 after tax. It looks like you make one with a 20mm bolt. the dimensions of the tool are as follows. threaded outside dimension 19.87mm. necked down outside 18.05mm by 9mm long. While the end of the tool looks like it is made to be hit I found that snugging the tool in by hand and two or three light to taps with a 16 oz brass hammer to the handle clockwise the generator popped right off.
| Free forum by Nabble | Disable Popup Ads | Edit this page |