Re: swingarm question (1976 k6)

Posted by shinyribs on May 28, 2013; 3:54am
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/swingarm-question-1976-k6-tp4041340p4041348.html

Tools is right. To clarify a little further,the center of shaft 9 is reduced in diameter to allow the grease to reach the bushings. Greasing the bolt during assembly is a good idea since it may prevent it from corroding and sticking inside shaft 9 down the road.

Don't try to remove the bushings unless you need to. Most likely they'll crumble.