Re: syncing carbs
Posted by shinyribs on May 31, 2013; 3:45am
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/syncing-carbs-tp4041517p4041536.html
The FSM calls for 20-22 cm/Hg-centimeters of mercury. On one of my vacuum gauges that compares to about 8 in/Hg-inches of mercury
Did your kit come with 4 little valves? If you put them in line to each gauge you can screw them in (closed) and it will lessen the blow of the vacuum pulses giving you a nearly perfectly still needle. Helps a bunch when you're trying to fine tune those puppies. You can also kink the hoses and apply pressure with a cable tie until they smooth out if you don't have the valves.
Regardless,that bike sounds killer dude!!!!
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/syncing-carbs-tp4041517p4041536.html
The FSM calls for 20-22 cm/Hg-centimeters of mercury. On one of my vacuum gauges that compares to about 8 in/Hg-inches of mercury
Did your kit come with 4 little valves? If you put them in line to each gauge you can screw them in (closed) and it will lessen the blow of the vacuum pulses giving you a nearly perfectly still needle. Helps a bunch when you're trying to fine tune those puppies. You can also kink the hoses and apply pressure with a cable tie until they smooth out if you don't have the valves.
Regardless,that bike sounds killer dude!!!!
| Free forum by Nabble | Disable Popup Ads | Edit this page |