Login  Register

Re: THE NEXT PROJECT!

Posted by Lucky 1 on Jul 11, 2013; 4:50pm
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/THE-NEXT-PROJECT-tp4043311p4043380.html

I would add a piece of curved sheet metal on the front about 30 inches high to streamline it just a little and keep the debris off of the bike. A piece of 10ga. would not even need much support.
You could bend it over a log. add a piece of roundbar along the top edge. Just skip weld.

Maybe shorten the trailer just a little too.

Make the fenders flat on top so you can sit on them.
On a Roadstar Adventure.