Login  Register

motion pro sync tool HELP!!

Posted by hood624 on Jul 28, 2013; 4:55pm
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/motion-pro-sync-tool-HELP-tp4044157.html

I bought a motion pro sync tool put it all together and done everyhitng like it told put restricters in the end of the hoses and turned all screw all the way out for sync all four channels to the main carb got them all set to the same and then cut the bike off and i thought that when i would shut the bike off the fluid level should go back down all the way but it doesnt it stay where it was while running i not sure if its something that i am doing i tried unhooking all line to c if it was the lines but no luck