Re: '80 cb750k Charging system troubles

Posted by nickajeglin on Jul 28, 2013; 10:38pm
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/80-cb750k-Charging-system-troubles-tp4044159p4044168.html

Ok, I've been pulling my hair out all day on this, but I finally came upon this post:

http://honda-cb750-s.456789.n3.nabble.com/Charging-td3270817.html

In there cheesehead mentions that the Ohms between the two copper rings that the brushes ride on on the rotor should read ~4 ohms, he said that his read 1.1 so it was bad.

Mine reads .1 ohms, so it must be dead eh? I assumed that if there was continuity between the two rings I was good, but we must be looking at an internal short here I suppose.

Am I on the right track?