Re: how to get this c clip out

Posted by shinyribs on Nov 24, 2013; 8:53pm
URL: http://vintage-and-classic-hondas.81.s1.nabble.com/how-to-get-this-c-clip-out-tp4047095p4047100.html

Im assuming a wrist pin clip fell into the engine cases during disassembly. If you can't fish it out with a magnet you're probably looking at splitting the cases. The hardest part of disassembling/reassembling these engines is the jugs and top end,which you've apparently already done, so opening the rest of the engine will be a snap. Besides, it sounds like it needs a good cleaning anyway. Good luck!